Pressure Washer Pump,Vertical 7/8" Shaft, MAX 3000 PSI, 2.5 GPM, Rear

FAST FREE SAME DAY SHIPPING! Ships from American Owned and operated family business!

Peggas/Yamatic 3100psi pump. Metal finish will vary from Aluminum silver finish and Gun metal finish.

Vertical 7/8" Engine Shafts ONLY

• GASOLINE PRESSURE WASHER VERTICAL PUMP - High-quality replacement pump for your pump. These are OEM replacement pumps for many models of pressure washers. If your old one stopped working, is corroded etc. don’t hesitate!
• PARTS COMPATIBILITY - THIS IS MADE FOR A VERTICAL ENGINE WITH A 7/8" SHAFT - Models stated in the listing are potential matches only and NOT a confirmation of compatibility.

PEGGAS Pump Measurements

• Mounting Bolt Measurement - From main center shaft to each mounting bolt is 4" - center to center spacing between mounting bolts is: 7 1/2" – 6 1/4" - 6 1/2"
• IMPORTANT FITMENT - This pump comes with a standard 7/8” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!

PEGGAS Pump Measurements

• Length: 8 1/16" (Inches) Length
• Height: 6 1/4" (Inches) tall

PEGGAS PWV(R)28/2.5HB Technical Specifications Sheet!

• IMPORTANT FITMENT - This pump comes with a standard 7/8” shaft which is universal for all small pressure washers. Hose connectors are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt-on directly!
• Mounting Bolt Measurement - From main center shaft to each mounting bolt is 4" - center to center spacing between mounting bolts is: 7 11/16" – 6 3/16" - 6 7/16

• Fits many models:
• Fits: BM802711, BM802823, BM80920, GC80747, GC80922, HL80833, HL80835, HLCA80710, HU80709, HU80709A, HU80714, HU80715, HU80722, HU80722A, HU80833, HU80833A, HU80911, HU80911A, HU80915, HUCA80709A
• Fits: RY802900, RY803000, RY80930, UT80709, UT80835, UT80911, UT80911A, UT80709A, UT80933, UT80993A, UT80993B, UT80993D, UT80993E, UT80993F, WF80710, WF80911
• Fits: PS262311, PS80943, PS80944, PS80946, PS80946A, PS80946B, PS80947, PS80947,PS80950, PS80979, PS80979A, PS80979B, PS80995, PS80995A, PS80995JA, RY802700, RY802700A, RY8C2700, RY802723, RY802800

Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

• Model
• Spec and/or Type Number
• Code and/or Serial Number
• Year

• FITMENT - This pump comes with a standard 7/8” shaft which is most common for all small Vertical pressure washers.
• Discharge Ports (1): 22mm Twist Connect (High-Pressure Hose)
• Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
• Comes with Built-In Unloader
• Built-In Chemical Injector
• Comes with a FREE Thermal Relief Valve

How to Install and Use Vertical Pressure Washer Pump!

7/8" Inch Vertical Shaft!

• PUMP SPECIFICATIONS:
• Type: Axial
• Head Material: Aluminum
• Engine HP required: 5.5 HP (Minimum)
• Max. Water Supply Temperature: 104°F
• Self-suction: Yes
• Pre-Oiled Ready to go!

7/8" Vertical Shaft Pump Mounted!

• When installing, please ensure that the keyway is installed before running your pressure washer.
• Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!

7/8" Vertical shaft pump in ACTION!

1. Max. Volume: 2.5 GPM Max.
2. Pressure Output : 3000 PSI Max.
3. Pump Speed: 3450 RPM

• Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!